Soft N Brite 1 Gallon [Laidlaw]

Soft N Brite

Gentle Liquid Laundry and Wetcleaning Detergent

Gentle liquid laundry and wetcleaning detergent for whiter whites and vibrant colors.

Phosphate-free formula with a near neutral pH, to provide a gentle but effective, cleaning product for casual wear garments and delicate fabrics.

 

Directions

 

Top-Loading (Home Style) Washers

Add Soft’N Brite to the water based on load size and water level settings. Mix thoroughly first, then add clothes.

For Full Loads

Add 4 oz. (120 mL) of Soft ‘N Brite.

For Medium Loads

Add 3 oz (90 mL) of Soft ‘N Brite.

For Small Loads

Add 2 oz. (60 mL) of Soft ‘N Brite. Dry and finish according to care label instructions.

 

Front Load (High-Efficiency) Small Capacity Washers

Add Soft ‘N Brite to the detergent dispenser and start cycle.

For Full Loads

Add 3 oz (90 mL) of Soft ‘N Brite to dispenser.

For Medium Loads

Add 2 oz. (60 mL) of Soft ‘N Brite to dispenser.

For Small Loads

Add 1 ½ oz. (45 mL) of Soft ‘ N Brite to dispenser.

Dry and finish according to care label instructions.

 

“Wash and Fold” Operations in Commercial Style Machines

Add Soft’ N Brite to the wheel at the start of the first fill when starting the washer at a rate of 4 to 6 oz per 50 lbs (or 50 to 80 mL per 10 kg) of load. Extract normally as per classification. Dry or finish depending on classification.

 

Professional Wetcleaning (Commercial Style) Machine

Add Aoft’ N Brite to the wheel at the start of he first fill when starting the washer. For all classifications, dry and finish according to care label instructions. For durable cottons & Blends: add Soft’ N Brite at a rate of 3 to 4 oz. per 30 lbs (or 65 to 90 mL per 10 kg) of load. For silks and other delicate (shrink prone) garments: add Soft’ N Brite at a rate of 2 to 3 oz. per 20 lbs. (or 65 to 100 mL per 10 kg) of load. Static drain if possible, and extract at High Speed for no more than one minute.

Note: Automatic dispensing and programming is recommended for professional wetcleaning use.

 

Digester bath Directions

In a clean plastic pail: prepare a fresh solution daily of 1 teaspoon of RSR® enzyme digester with 1 oz. of Soft ‘ N Brite per 1 gallon (or 15 mL of RSR with 80 mL of Soft ‘ N Brite per 10 L) of warm water(100⁰ to 110⁰F/38⁰ to 43⁰C). Soak garment for 15 to 20 minutes, gently agitate before removing garment: rinse, dry and proceed to necessary pressing and finishing.